A wireless router is not perfect in large homes and offices as it does not have much wireless coverage. So its range does not cover the entire area, due to which you have to face the weak signal. If you want to enhance the network coverage with your traditional router and also increase the network range then you can enhance it with an extender device. Because the extender device is designed to extend the range of traditional devices and also to extend the coverage. But the question becomes, which extender fully supports all routers, so Signal tech Wifi range extender supports all the brands of the router. Moreover, the network signals of this device are ultra-high, and network coverage is also wider.
The Signal Tech wireless extender has three lights that completely show the status of the extender device. With the LEDs light, you can easily know the information about the extender setup. The installation of signal tech wifi booster with the traditional router is simple & effortless. If you wish to enhance the network range of your traditional router then you have to install the extender in an accurate manner.
Information about Signal Tech Wifi Range Extender
The Signal Tech wireless extender comes along with many buttons, LEDs, and ports. If you really use this device then you can know the information about the range extender device. If you know the information about it, then you can use this device well. The information about the range extender device is as follows.
Power ON/OFF, WPS, & Reset button
The Signa Tech Wireless booster/extender comes along with three buttons. This button is usually more helpful to accurately operate the repeater device. The three buttons are the power ON/OFF, reset, & WPS button. If you wish to enhance the network signals of the existing networking device like gateway modem, standard router, access point, & public network then you need to turn ON the extender device. With the power button, you instantly turned ON the device. If you wish to install the existing device with a range extender device then you can use the WPS button and surely install the extender. This type of installation is very simple & trouble-free. Just pressing the finger on the WPS button of both devices. Then the installation process is ready. If the range extender device is not working then you can use the reset button and accurately perform the reset.
Three LEDs indicator lights
The indicator light is also equipped in the range extender. With this light, you can easily know the status of the extender device. If you wish to configure the setting then with the help of a LEDs light you can easily configure all the settings. If the Wifi LEDs light solid red that means your traditional device is far from the extender device. Although, the Wifi LEDs’ lights flashing red means the firmware version is outdated. Then, you need to update the firmware version to the latest version. Thus, the LEDs light also helps to properly maintain as well as know the status of the extender device.
One LAN port
The one LAN port is also built-in in the Signal Tech extender device. With this port, you can easily connect your wired device to the range extender device. If the traditional router is wired then you think about how to connect the router to the extender device. Then, with the LAN port of this device, you can easily connect the wireless router to the extender device.
Configure Repeater Mode In Signal Tech Wifi Range Extender
If you wish to get the high-network signals then you need to configure the repeater mode in the extender device. Because the repeater mode entirely extends the network range. If you really wish to configure this mode then you have to get the login page.
Get the login page
To configure the repeater in the range extender device, you need to get the login page. You can connect your computer or laptop device to stable Wifi network connectivity. Then, use the web interface and input myrepeater.net or http://192.168.10.1 in the address field. Now, the login page of this device is accessed. You can insert username & password in their field, both the fields you can enter admin. After inserting all the information you can click the login option and log in to the account.
Configure repeater mode
After accessing the login of the range extender device, you can easily configure the repeater mode. You can visit the web page of this device and smoothly select the repeater mode. In the wireless repeater mode, you can enter the SSID of the repeater. Then, you can enter the security key in their field. After that, click the Apply option. Now, the repeater mode is successfully configure.
Must Read – Dlink DIR 822 DB Wireless Router
